Skip to main content

Aker Solutions develops modified workover system

Published by
Oilfield Technology,


Aker Solutions has developed a modified workover system that enables faster and more cost-effective planned interventions. The concept will be first applied on Equinor’s Visund field in the North Sea.

Aker Solutions develops modified workover system

Workover systems enable safe well access for subsea installation and completion, diagnostics, maintenance, repairs, enhanced production and finally plugging and abandonment.

The operational concept entails delivering Aker Solutions’ multiWOS system by vessel and landing the system on either a subsea platform or a well. The vessel then extracts, and the rig picks up the stack and commences the intervention campaign.

The mobilisation of the workover system can be executed well in advance of the intervention activities, hence the operator will have more flexibility both before and after operations, as the system can be parked subsea.

The main advantage with this concept compared to the more traditional approach is that the system is kept subsea and not taken onboard the rig. Other advantages include:

  • Use of existing multiWOS system.
  • Modification and re-use of existing components.
  • Reduced work in 'red zone'.
  • Greatly reduced skidding, handling and lifting on the rig.
  • Safe and efficient operations.

"This project has been a joint collaboration between Equinor and Aker Solutions from the start. The new intervention concept is faster, more cost effective and safer than traditional workover systems," said Andreas Kraabøl, VP Subsea Lifecycle Services, Norway.

The system and associated equipment will be modified and delivered in the spring of 2021 to perform intervention operations on Visund.

The Visund field northeast of Gullfaks has a water depth of 335 m and 23 Aker Solutions subsea trees installed. Interventions will play an increasingly important role operationally in the future for Visund to increase oil recovery.

Image courtesy of Aker Solutions

Read the article online at: https://www.oilfieldtechnology.com/offshore-and-subsea/17062020/aker-solutions-develops-modified-workover-system/

You might also like

Strohm delivers deep-water TCP Jumper in Guyana

ExxonMobil affiliate Esso Exploration & Production Guyana Ltd is set to install a subsea water alternating gas (WAG) jumper made from Strohm’s Thermoplastic Composite Pipe (TCP) on the Liza Phase 2 project in Guyana.

 
 

Embed article link: (copy the HTML code below):


 

This article has been tagged under the following:

Upstream news Offshore news Upstream project news Oil & gas news