Skip to main content

GustoMSC launches the SmartCrane

Published by , Editorial Assistant
Oilfield Technology,



The GustoMSC SmartCrane offers features that directly address the call for cost reduction from operators, while providing drilling contractors with a means to distinguish themselves. Based on many years of experience in designing and building cranes, the SmartCrane have been designed so that it can be retrofitted to existing cantilever jack-up rigs instantly increasing efficiency, or fitted onto a new-build design.

Two elements were high on the agenda when developing this piece of equipment: facilitating SIMOPS independently of any operation in progress on the drill floor and easing material handling underneath the cantilever or between the work platform and drill rig. Enabling a wireline operation away from the drill floor is a huge advantage in development drilling and plug and abandonment operations. The SmartCrane enables wire line through its moveable arm with the hoisting point underneath the cantilever. In this way, wireline operations can take place on one well while development drilling or plug and abandonment operations are going on at another well.

The savings in rig days for a plug and abandonment operation can amount to around 10% compared to the conventional way, in which all activities such as logging and cementing must be performed in a sequence on one well from the drill floor. The SmartCrane enables several activities to take place at the same time on one well, or to do preparatory work on one well while the drill floor is working on another well.

In addition, the SmartCrane provides a 20 mt hoisting capacity underneath the cantilever at any position outside the drilling riser, and also has the possibility to reach to the main deck of the rig. Thus, it can transfer containers and other pieces of equipment (<20 mt) from the main deck of the rig to underneath the cantilever and vice versa. This is a unique feature that greatly enhances safety and efficiency, as crane access to the wellhead from the drilling rig is difficult due to the area being blocked by the cantilever.

The SmartCrane will be launched at OTC Houston. More information will be presented at the GustoMSC stand 11007.


Adapted from a press release by Louise Mulhall

Read the article online at: https://www.oilfieldtechnology.com/product-news/03052016/gustomsc-launches-the-smartcrane/

You might also like

 
 

Embed article link: (copy the HTML code below):


 

This article has been tagged under the following:

Oil & gas news