The well was drilled about 5 km west of the Morvin field in the Norwegian Sea and 240 km northwest of Kristiansund.
The discovery was proven in 2018 in Lower Cretaceous reservoir rocks (the Lange Formation). Before well 6506/11-12 S was drilled, the resource estimate for the discovery in the Lange Formation was between 3 and 23 million m3 of recoverable oil equivalents.
The objective of the well was to delimit the gas/condensate discovery in the Lange Formation toward the southwest, reduce uncertainty associated with the resource estimate, and to conduct a formation test.
The well encountered an interpreted gas column of about 8 m in the Lange Formation, with sandstone layers totalling about 83 m with variable reservoir properties from poor to moderate. The gas/water contact was not directly encountered.
The operator's preliminary estimate of the size of discovery 6506/11-10 (Hades) is between 2 and 7 million m3 of recoverable oil equivalents. The licensees in production licence 644/644 B will assess the updated resources in 6506/11-10 (Hades) along with resources in the Middle Jurassic (Garn Formation) in the same discovery well, 6506/11-10 (Iris), for further follow-up.
The well was not formation-tested, but extensive data acquisition was carried out.
This is the second exploration well in production licence 644. This licence was awarded in APA 2011. Discovery well 6506/11-10 was drilled in production licence 644 B, which was awarded in APA 2015.
Well 6506/11-12 S was drilled to a measured depth of 4150 m and a vertical depth of 4062 m below sea level, and was terminated in the Lange Formation in the Lower Cretaceous.
Water depth at the site is 433 m. The well will now be permanently plugged and abandoned.
The well was drilled by the Island Innovator drilling facility, which will now proceed to Hanøytangen shipyard.
Read the article online at: https://www.oilfieldtechnology.com/offshore-and-subsea/28072020/omv-concludes-appraisal-of-gascondensate-discovery-offshore-norway/
You might also like
The machine learning models that have been developed can assist geologists and geophysicists in reconstructing missing well logs, making lithology predictions, calculating shale content, and mapping potential undiscovered reservoir areas.