McDermott completes Phase 1 of QGEP Atlanta Early Production System

McDermott successfully performed the project management, engineering and offshore installation of all subsea hardware, including flexible pipes, umbilicals, umbilical termination assemblies, and associated equipment for the subsea umbilicals, risers and flowlines (SURF) project. McDermott also provided the flexible and umbilicals load out, logistics base and associated services. This additional scope was added to McDermott’s initial award.

The Atlanta EPS project is the first engineering, procurement, construction and installation (EPCI) lump sum project by the McDermott team in Brazil. “Our outstanding performance on this project demonstrates a strong track record in the region and positions our company for future opportunities. We look forward to the opportunity to perform additional scope of work for the future phases of the Atlanta field for QGEP,” said Paulo Veronesi, McDermott Brazil Country Manager.

McDermott’s load out base was located at Porto do Açu, approximately 155 miles (250 km) north of Rio de Janeiro. The McDermott Atlanta project team developed the appropriate base lay-out and facilities, which was fully equipped with the required loading equipment and offices.

“McDermott built a strong partnership with QGEP during the project working closely with our team to ensure the safety of operation and the quality expected for the scope. We are pleased with the results achieved together,” said Danilo Oliveira, QGEP Production Director.

McDermott used two vessels to execute the offshore scope. McDermott’s North Ocean 102 performed the umbilical installation scope while the Skandi Niteroi, a third party vessel, performed the flexible installation.

“The load out of the flexibles and umbilicals was completed successfully in accordance with the original plan based on the planned schedule,” said Francisco Quaresma, McDermott’s Project Manager for the Atlanta EPS project. “Although a challenging project, we overcame every obstacle to deliver the work successfully and safely. Because of our strong performance, QGEP awarded us additional scope for the load out and logistics support, which was a clear demonstration of QGEP´s confidence in our ability to deliver the work as planned.”

Project details

The production system of Atlanta field is located at the Santos Basin in Block BS-4 in a water depth of approximately 5085 ft (1550 m). The EPS consists of a dedicated floating production storage and offloading (FPSO) vessel with a single point mooring (SPM) turret that connects to three wells (2HP and 3H already drilled and 4HA to be drilled late 2018 or early 2019) and is equipped with horizontal Wet Christmas Trees (WCT) with individual vertical flowline connections.

Production from the EPS is estimated to reach 20 000 bpd with the commissioning of the first two wells and is expected to increase to 30 000 bpd with the commissioning of the third well. Scheduled to start in 2021, the definitive production phase will integrate a larger FPSO with a processing capacity of 80 000 bpd and development of up to nine additional horizontal wells. It will also increase the field’s production capacity to 75 000 bpd.

QGEP holds a 30% interest and is the operator of Block BS-4 and is the only Brazilian operator in the Santos basin pre-salt exclusion zone. Other Atlanta partners include Dommo Energia (40%) and Barra Energia (30%).

Read the article online at: https://www.oilfieldtechnology.com/offshore-and-subsea/12042018/mcdermott-completes-phase-1-of-qgep-atlanta-early-production-system/