Rystad analysis indicates US fraccing activity set for biggest monthly decline
Published by Nicholas Woodroof,
Rystad estimates that the total number of started frac operations will end up below 300 wells in April 2020; close to 200 in the Permian and less than 50 wells each in Bakken and Eagle Ford. This translates into a 60% decline in started frac operations between the peak level seen in January to February 2020 and April 2020, as the majority of public and private operators implement widespread frac holidays.
In March Rystad observed an extreme 30% monthly decline in the number of started frac jobs in these three major oil basins, a fall from 807 in February to just 550. Also, nationwide fraccing activity, on a completed jobs basis, might have already declined by around 20% in March 2020, according to our estimates.
“With such a rapid decline in fraccing already visible, very little activity will be happening in the oil basins during the remainder of the second quarter of 2020. The natural base production decline, which we have seen as an absolute floor for production, therefore becomes an increasingly relevant production scenario,“ said Rystad Energy Head of Shale Research Artem Abramov.
If we assume that no new horizontal wells are put on production from April 2020 onwards, total LTO production will decline by 1 million bpd by May, 2 million bpd by July and by 3 million bpd by October to November, with the Permian Basin accounting for more than half of nationwide base decline.
US light oil operators, which are now announcing voluntary production curtailments, will try to deliver on these cuts as much as possible from the natural production decline, as opposed to shut-ins of producing wells (though some of the marginal, least economic volumes are being shut in, too).
The magnitude of the base decline for US LTO sounds extreme in the context of what we see for other supply sources globally. But ironically, the steep decline is actually too late to save prices; despite the oversupply issue, standard operation patterns prevent operators from simply turning the faucet off. These days Permian wells require about two months from the moment frac operations start until they produce first oil, and require about three months before they reach peak output.
Hence, the decline in started jobs which began in March will result in a lower number of wells put on production in May, which ultimately will lead to a drop in peak production in June if normal operational patterns are maintained.
“On the demand and storage side, the market is already moving through its toughest challenge yet, and the WTI front-month sell-off emphasised how broken the physical market might be already. We are therefore concerned that significant production shut-ins will be required in the next few weeks to bring the market into the balance in a brutal manner,“ added Abramov.
In addition to Rystad's standard analysis of frac activity, based on incomplete FracFocus reporting in recent months and empirical reporting delay adjustment factors, Rystad is now rolling out a new way of filling the gaps left by official reporting – using satellite data to systematically monitor more than 40 000 permitted and drilled locations across the US, continuously identifying the presence of any activity taking place.
Rystad's methodology is based on monitoring the equipment intensity on each pad or permitted location and then analysing the evolution of this intensity over time to identify the main pre-production activities in each well life cycle, from pre-spud to main drilling and fraccing.
Read the article online at: https://www.oilfieldtechnology.com/hydraulic-fracturing/23042020/rystad-analysis-indicates-us-fraccing-activity-set-for-biggest-monthly-decline/
You might also like
HESS selects Halliburton to implement digital wells
Hess Corporation has selected Halliburton’s well construction suite to plan, design, and construct safe, cost effective, and productive wells.