Skip to main content

Sulzer uses captured CO2 to optimise oil recovery

Published by
Oilfield Technology,


Sulzer’s pumps are helping to optimise oil recovery while reducing greenhouse gas emissions in a pioneering project in the Middle East. As part of enhanced oil recovery (EOR) techniques, captured CO2 emissions that have been converted into supercritical CO2 are pumped into depleted oil reservoirs to push the remaining oil to the riser, allowing much higher recovery rates. The pumped CO2 is then stored in the underground oil field, providing a perfect storage medium for the greenhouse gas. This circular process has the power to transform the oil and gas industry by reducing CO2 emissions while simultaneously maximising recovery from existing oil fields – reducing the need for further oil exploration.

It is widely acknowledged that the traditional primary and secondary recovery methods for oil can leave up to 75% of the oil in the ground. Oil production from mature fields has therefore been declining and discoveries of new reservoirs will be insufficient to match growing energy demands. To reduce the need for further oil exploration, enhanced oil recovery (EOR) techniques are now coming to the fore, with this method using captured CO2 emissions that have been converted into supercritical CO2, showing particular promise.

Sulzer’s highly specialised pumps allow the CO2 to be pumped like a liquid, sweeping through a reservoir to push the oil to the riser with much higher efficiency than traditional methods using water. At the same time, the depleted oil fields then provide a perfect storage medium for the CO2, ensuring that it is not released into the atmosphere.

This pioneering process could therefore be a major benefit for the oil industry, providing new technology to help maximise recovery from existing oil fields, thereby reducing the need for further oil exploration, while also cutting CO2 emissions. Sulzer’s expertise is critical to the process, as the lightness and extremely high pressure of supercritical CO2 have a significant impact on the design of the pump, with most manufacturers steering clear of such applications.

Frederic Lalanne, CEO and President of Sulzer’s Flow Equipment Division commented: “As global demand for energy and materials continues to rise, it’s becoming ever more important to optimise the use of existing resources and work towards increasing renewables while also expanding the circular economy. Sulzer is committed to accelerating this transition using its engineering expertise, and this innovative process is one more example of how our technology can help to sustainably transform CO2-emitting industries”.

Read the article online at: https://www.oilfieldtechnology.com/exploration/23052022/sulzer-uses-captured-co2-to-optimise-oil-recovery/

You might also like

Strohm delivers deep-water TCP Jumper in Guyana

ExxonMobil affiliate Esso Exploration & Production Guyana Ltd is set to install a subsea water alternating gas (WAG) jumper made from Strohm’s Thermoplastic Composite Pipe (TCP) on the Liza Phase 2 project in Guyana.

 
 

Embed article link: (copy the HTML code below):


 

This article has been tagged under the following:

Oil & gas news