Skip to main content

AnTech launches industry’s first real time at-bit geosteering service for Coiled Tubing Drilling

Published by
Oilfield Technology,

Specialist Directional Coiled Tubing Drilling Service company AnTech Ltd, has announced the launch of RockView - a technology that makes real time, high resolution geosteering possible for the first time.

The breakthrough will enable more accurate wellbore placement than ever before and provide a tangible decrease in the amount of footage drilled out of zone. This will lead to a direct improvement in the production of a well.

Predicting the exact position of a target reservoir from surface is difficult and utilises geosteering to analyse the cuttings returning from the bit or with Logging While Drilling tools positioned back from the bit. Both of these methods involve a delay between the time that the bit drills a formation and the time that the formation is identified.

The new RockView service works by using the measurements gathered from the full range of sensors on AnTech’s latest generation COLT and POLARIS BHAs. Using proprietary techniques, these can be combined to determine how hard it is to drill through a particular rock formation.

The new technology offers considerable advantages over current methods of geosteering, which are accurate but suffer from limitations which create the delay in the transmission of data.

RockView has been developed to mitigate that delay in service for wells that can be drilled with coil tubing. It provides near instantaneous information about conditions at the bit, and fine linear resolution. The directional driller can determine which formation is being drilled by comparing to logs prepared by the geologists.

The well trajectory can be adjusted to keep the drill bit in zone thereby avoiding the overshooting that can be caused by other geosteering methods.

“RockView is an exciting innovation for the industry,” says Toni Miszewski, Managing Director of AnTech Ltd.

“It will increase drilling productivity because it is an at-bit technology that will help the directional driller identify the target zone and then keep in zone. Inaccurate drilling reduces well output and is simply a waste of time and money.

“Predictability reduces the financial risk to operators and provides a much-needed increase in drilling efficiency, which has sometimes been lacking in the industry.”

Read the article online at:

You might also like


Embed article link: (copy the HTML code below):


This article has been tagged under the following:

Upstream news Upstream drilling news Oil & gas news