SDX announce gas discovery at SD-4X well, Egypt and provide LMS-1 well test results

The SD-4X well was drilled to a total depth of 7806 ft and encountered 89 ft of net conventional natural gas pay in the Abu Madi horizon, which had an average porosity in the pay section of 24%. The well came in on prognosis with a reservoir section of similar quality but thicker than the original SD-1X discovery well.

The well will be completed as a producer in the Abu Madi and then tested after the drilling rig has moved off location. The testing is anticipated to commence between 30 and 45 days after the rig departs, depending on the availability of testing equipment. Assuming a successful test, it is anticipated that the well will be connected to the infrastructure located adjacent to the original SD-1X discovery, where production start-up is anticipated late in the 4th quarter of 2018. After completion, the rig will move to the SD-3X well which is the second of two appraisal locations included in the 2018 development programme.

The well test programme in the LMS-1 well in the Company’s Lalla Mimouna Nord permit in Morocco has been completed. Upon test the well flowed at sub-commercial rates which at this stage we believe are temporary and due to damage created by the fluids used to control the elevated pressures encountered in the well whilst drilling, however this is still being investigated. At present, it is believed that the damage is the result of formation clays reacting to certain components used to increase the mud weight of the drilling fluid. The reservoir section, beyond this zone of damage, is thought to be of excellent quality based upon the well log response and is not expected to have been damaged by the drilling fluids. Once the fluid interaction study is complete, a stimulation programme will be designed and implemented and the well test will be repeated.

Paul Welch, President and CEO of SDX, commented:

“We are extremely encouraged by today’s result at South Disouq. We had anticipated a thickening of the pay section as we moved away from the crest of the structure, and this has now been confirmed. We will now accelerate our development activity in the area. It’s our intent to establish production from both the South Disouq and Ibn Yunus areas before year end 2018. These results demonstrate the significant potential we see in this area.

“At LMS-1, we were very surprised by the results of the flow test. The well flowed a significant amount of gas whist drilling requiring the drilling mud weight to be increased to control the well so it could be logged and completed. That said, this part of the basin is a frontier area and this was the first time this section had been drilled, so the composition of the reservoir section was unknown. Fortunately, we have a complete data set from this well which will allow us to quickly and accurately design a stimulation programme for this, which we are confident will work.”

“Overall we are very pleased with our recent drilling activity. In Morocco we had seven successful results from our nine well programme and in Egypt we have had three successes out of the four wells drilled to date with one well to go. I am looking forward to updating our shareholders on the well test results of the SD4X, the spud of SD-3X and the progress we are making on our development activity in South Disouq along with our plans to retest the LMS-1 in Morocco in due course.”

Read the article online at: https://www.oilfieldtechnology.com/drilling-and-production/18062018/sdx-announce-gas-discovery-at-sd-4x-well-egypt-and-provide-lms-1-well-test-results/