Skip to main content

ICONIC installs first iTP in Norwegian North Sea

Published by
Oilfield Technology,


ICONIC has successfully installed its first Instrumented Tubular Plug (iTP) in the Norwegian North Sea. Designed to provide real time pressure and temperature data anywhere in the well, the iTP has been qualified for use on high pressure high temperature (HPHT) wells.

ICONIC installs first iTP in Norwegian North Sea

The iTP was installed for a major international operator from a fixed installation offshore. The device was mounted below the 9 5/8 in. casing plug and was successfully set at 45 m deep. The iTP monitored the pressure and temperature data continuously from below the plug until it was retrieved two days later. By knowing the pressure below the plug, the iTP guaranteed its safe retrieval. It achieved this by making the operations team aware of any pressure equalising that was required beforehand. The next iTP installation is scheduled for the same operator in 2020. Continuous monitoring allows the operational decisions to be performed in a safe and cost-efficient manner, compared with other solutions on the market.

The iTP technology offers different cost savings depending on its application. When using a tubing hanger plug, the cost savings are made because retrieval of the plug can take place without the use of a pressure control system. This cuts down the time and cost for the wireline rig up. In other cases, such as Xmas tree change out or Xmas tree maintenance operations, the iTP eliminates the need for a deep-set plug and therefore removes this activity from the critical path. For an Xmas tree change out or maintenance operations, the use of the iTP will typically result in, but is not limited to, cost savings in the range of US$150 000 – 200 000.

The iTP can also be used for many other applications where wireless monitoring enables the operator to reduce risk and facilitate easy decision making, this makes the drilling or intervention operation a more cost-efficient manner. Some potential applications are temporary plugging for drilling and intervention, perforation logging, P&A and riser-less pre slot recovery.

Jarl Endre Pedersen, CEO, ICONIC said: “As a young company, we are very proud to have successfully delivered our first iTP installation for a major operator in Norway. With the successful installation and monitoring on the pilot well installation, we have shown that knowledge is power. By having more access to real time data, costs are cut and safety is heightened. We very much look forward to our next installation, which is scheduled to take place later this year.”

The iTP enables the operator to preform barrier verification tests when two plugs are set within close distance, making enhanced safety a key benefit of the technology. For retrieval of plugs knowing the pressure below the plug beforehand makes it possible to plan for necessary equalising in safer and more cost-efficient manner.

Read the article online at: https://www.oilfieldtechnology.com/drilling-and-production/07072020/iconic-installs-first-itp-in-norwegian-north-sea/

You might also like

Howden secures compressor contract for Majnoon oilfield, Iraq

Howden will supply two screw compressor packages to Majnoon oilfield, near Basrah, Iraq. With Howden’s compressor solution, the Majnoon oilfield will save 42 242 t of carbon emissions per year – the equivalent of annual fossil fuel emissions for 9100 cars.

 
 

Embed article link: (copy the HTML code below):